Water Remover Aluminum

How to use water pushers for tennis courts
1. How to push the water to dry the tennis court surface

If your tennis court only moves water in one place, you just put the pushrod down and push the water onto the surface of the yard. Push until clean water.

If your tennis court has plenty of water to float around the yard. You have to push the entire surface of your yard. Place the pushrod into the corner and start pushing from one edge to the other. Continue to circle until the end of the pitch.

2. How to hold a tennis pusher

• Place the pushrod into the yard
• Identify the bottom of the propeller blade
• Handle the water push rod so that the wheel and tongue of the propeller are in close proximity to the tennis court surface:
• The wheel can not be opened when pushing the water so that it will push the water pushed very hard to accelerate the wear and tear of the water push.
• Do not allow the blade section touch the pitch too hard (wiping the blade) because it makes it difficult to push and quickly wipe the wiper blade.
• Hold the pushrod and push forward, not push down the pitch. If you are unfamiliar then you just push slowly, then forget it and you can push faster but must be technically correct.

Tennis racket also used for raking floors, floor wipers, home yards, indoor and outdoor playgrounds.

Minh Quan Sai Gon Company is one of the companies specializing in building tennis courts and providing the leading tennis equipment in Vietnam. You will be pleased to buy water pusher, tennis court, wiper tennis court with INOX in our company.